Add ascii_usb ASCII Serial Console terminal converter

This commit is contained in:
tmk 2014-01-03 07:05:41 +09:00
parent 37bf34d5b1
commit 92cda14f7a
7 changed files with 448 additions and 0 deletions

View File

@ -40,6 +40,7 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
* [sun_usb](converter/sun_usb/) - [Sun] to USB(type4, 5 and 3?)
* [pc98_usb](converter/pc98_usb/) - [PC98] to USB
* [usb_usb](converter/usb_usb/) - USB to USB(experimental)
* [ascii_usb](converter/ascii_usb/) - ASCII(Serial console terminal) to USB
### keyboard
* [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**

View File

@ -0,0 +1,82 @@
# Target file name (without extension).
TARGET = ascii_usb
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
SRC = keymap.c \
matrix.c \
led.c \
protocol/serial_uart.c
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# *Comment out* to disable the options.
#
#MOUSEKEY_ENABLE = yes # Mouse keys
#EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
#NKRO_ENABLE = yes # USB Nkey Rollover
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

View File

@ -0,0 +1,33 @@
ASCII to USB keyboard protocol converter
========================================
This converts serial console terminal into USB keyboard, tested with TRS-80 model 100 TELCOM application.
Target MCU is ATMega32u4 but other USB capable AVR will also work.
Hardware
--------
Connect RX, TX and GND to UART pin of AVR. Note that you may need line drvier/level shfiter like MAX232 to interface high voltage of RS-232C.
Build Firmware
--------------
Configure UART setting and Just use 'make'
$ cd ascii_usb
$ make
Then, load the binary to MCU with your favorite programmer.
Limitation
----------
- This cannot see key up event, you cannot hold a key.
- Alt, Gui(Win/Mac) modifier key are not available.
Scan code
---------
ASCII code(0x01-7F)

View File

@ -0,0 +1,70 @@
/*
Copyright 2014 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x5C01
#define DEVICE_VER 0x0100
#define MANUFACTURER t.m.k.
#define PRODUCT ASCII keyboard converter
#define DESCRIPTION converts Serial Console Terminal into USB keyboard
/* matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 16
/* key combination for command */
#define IS_COMMAND() ( \
host_get_first_key() == KC_BRK \
)
/*
* Serial(USART) configuration
* asynchronous, positive logic, 19200baud, bit order: LSB first
* 1-start bit, 8-data bit, odd parity, 1-stop bit
*/
#ifdef __AVR_ATmega32U4__
#define SERIAL_UART_BAUD 19200
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
#define SERIAL_UART_RXD_VECT USART1_RX_vect
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
#define SERIAL_UART_INIT() do { \
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
UCSR1C |= (1<<UPM11) | (1<<UPM10); /* parity: none(00), even(01), odd(11) */ \
sei(); \
} while(0)
#else
#error "USART configuration is needed."
#endif
/* disable action features */
#define NO_ACTION_LAYER
#define NO_ACTION_TAPPING
#define NO_ACTION_ONESHOT
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
#endif

View File

@ -0,0 +1,42 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
#include "keycode.h"
#include "action.h"
#include "action_macro.h"
#include "action_util.h"
#include "util.h"
#include "print.h"
#include "keymap.h"
// Keymap is not used. See matrix.c.
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
{
return KC_NO;
}
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint8_t keycode)
{
return (action_t) { .code = ACTION_NO };
}

25
converter/ascii_usb/led.c Normal file
View File

@ -0,0 +1,25 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "stdint.h"
#include "serial.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
}

View File

@ -0,0 +1,195 @@
/*
Copyright 2014 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "util.h"
#include "matrix.h"
#include "debug.h"
#include "action_util.h"
#include "protocol/serial.h"
/*
* Not use Matrix.
*
* ROW: 16(4bits)
* COL: 16(4bits)
*
* 8bit wide
* +---------+
* 0|00 ... 0F|
* 1|08 ... 1F|
* :| ... |
* :| ... |
* E|E0 ... EF|
* F|F0 ... FF|
* +---------+
*/
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
debug_matrix = true;
serial_init();
debug("init\n");
return;
}
static void type_key(uint16_t keycode)
{
if (keycode == 0) return;
uint8_t mods = keycode>>8;
uint8_t key = keycode&0xFF;
if (mods) {
add_mods(mods);
send_keyboard_report();
}
add_key(key);
send_keyboard_report();
del_key(key);
send_keyboard_report();
if (mods) {
del_mods(mods);
send_keyboard_report();
}
}
static uint16_t code2key(uint8_t code)
{
// ASCII to key combination in US laout
switch (code) {
case 0x01 ... 0x08: // Ctrl-[a-z]
return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
case 0x09: return KC_TAB; // TAB(Ctrl-i)
case 0x0A ... 0x0C: // Ctrl-[a-z]
return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
case 0x0D: return KC_ENTER; // Enter(Ctrl-m)
case 0x0E ... 0x1A: // Ctrl-[a-z]
return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
case 0x1B: return KC_ESC;
case 0x1C: return KC_RIGHT;
case 0x1D: return KC_LEFT;
case 0x1E: return KC_UP;
case 0x1F: return KC_DOWN;
case 0x20: return KC_SPACE;
case 0x21: return MOD_BIT(KC_LSHIFT)<<8 | KC_1; // !
case 0x22: return MOD_BIT(KC_LSHIFT)<<8 | KC_QUOTE; // "
case 0x23: return MOD_BIT(KC_LSHIFT)<<8 | KC_3; // #
case 0x24: return MOD_BIT(KC_LSHIFT)<<8 | KC_4; // $
case 0x25: return MOD_BIT(KC_LSHIFT)<<8 | KC_5; // %
case 0x26: return MOD_BIT(KC_LSHIFT)<<8 | KC_7; // &
case 0x27: return KC_QUOTE; // '
case 0x28: return MOD_BIT(KC_LSHIFT)<<8 | KC_9; // (
case 0x29: return MOD_BIT(KC_LSHIFT)<<8 | KC_0; // )
case 0x2A: return MOD_BIT(KC_LSHIFT)<<8 | KC_8; // *
case 0x2B: return MOD_BIT(KC_LSHIFT)<<8 | KC_EQUAL; // +
case 0x2C: return KC_COMMA; // ,
case 0x2D: return KC_MINUS; // -
case 0x2E: return KC_DOT; // .
case 0x2F: return KC_SLASH; // /
case 0x30: return KC_0;
case 0x31 ... 0x39: // 1-9
return KC_1 + (code-0x31);
case 0x3A: return MOD_BIT(KC_LSHIFT)<<8 | KC_SCLN; // :
case 0x3B: return KC_SCLN; // ;
case 0x3C: return MOD_BIT(KC_LSHIFT)<<8 | KC_COMMA; // <
case 0x3D: return KC_EQUAL; // =
case 0x3E: return MOD_BIT(KC_LSHIFT)<<8 | KC_DOT; // >
case 0x3F: return MOD_BIT(KC_LSHIFT)<<8 | KC_SLASH; // ?
case 0x40: return MOD_BIT(KC_LSHIFT)<<8 | KC_2; // @
case 0x41 ... 0x5A: // A-Z
return MOD_BIT(KC_LSHIFT)<<8 | (KC_A + (code-0x41));
case 0x5B: return KC_LBRACKET; // [
case 0x5C: return KC_BSLASH; //
case 0x5D: return KC_RBRACKET; // ]
case 0x5E: return MOD_BIT(KC_LSHIFT)<<8 | KC_6; // ^
case 0x5F: return MOD_BIT(KC_LSHIFT)<<8 | KC_MINUS; // _
case 0x61 ... 0x7A: // a-z
return KC_A + (code-0x61);
case 0x7B: return MOD_BIT(KC_LSHIFT)<<8 | KC_LBRACKET; // {
case 0x7C: return MOD_BIT(KC_LSHIFT)<<8 | KC_BSLASH; // |
case 0x7D: return MOD_BIT(KC_LSHIFT)<<8 | KC_RBRACKET; // }
case 0x7E: return MOD_BIT(KC_LSHIFT)<<8 | KC_GRAVE; // }
case 0x7F: return KC_DELETE; //
}
return 0;
}
uint8_t matrix_scan(void)
{
uint16_t code = serial_recv2();
if (code == -1) {
return 0;
}
print_hex8(code); print(" ");
// echo back
serial_send(code);
type_key(code2key(code));
return code;
}
inline
bool matrix_has_ghost(void)
{
return false;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return false;
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return 0;
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < matrix_rows(); row++) {
phex(row); print(": ");
pbin_reverse(matrix_get_row(row));
print("\n");
}
}